Vincos 20Ft 6 an 6an AN6 Nylon and Stainless Steel Braided Oil Gas Fuel Hose Fuel Line + 10pcs 6an Hose Fitting Kit
Inner diameter(ID):8.71 mm 0.342 inch
Outside diameter(OD):13.70 mm 0.54 inch
inner hose Materail:CPE Synthetic Outer
Outside Materail:Nylon and Stainless Steel
Fitting Material: High Quality 6061 Aluminum Alloy
Working Temperature:-40 F to 248 F under most operating.
Working Pressure:500 PSI
√ This hose provides you with unsurpassed levels of performance and reliability for your tough performance applications.
√ This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.
√ This hose is made of Polyurethane on the inside that gives them high chemical and heat resistance, along with a braided stainless steel outside which gives them high durability, extreme pressure resistance, and a professional and high-tech appearance.
√ They are smooth bore for optimal flow.
For use with fuel systems, methanol, oils, lubricants, coolant system and vacuum applications.
Suitable for fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes.
This hose isn't suitable for brake fluid and is not to be used near extreme heat sources such as a turbocharger.
AN-6 Stainless steel Fuel Hose x 20ft
AN-6 Straight Fitting x 4
AN-6 45 degree Fitting x 2
AN-6 90 degree Fitting x 2
AN-6 180 degree Fitting x 2
How to Cut:
For cutting your new steel braided hose to length you will need:
* Cutting wheel/ hack saw/ or steel braided hose cutters
* Duct tape or electrical tape (work best)
1. Measure your hose and find desired length.
2. Tape hose at measured length needed for application.
3. Cut hose threw the tape you have placed. (This keep the steel braid from fraying.)
4. Remove the tape.
5. Slide one end of hose into end of fitting.
6. Insert the other half of fitting into the hose and begin to push and screw the fitting together.
7. Make sure all connection are tight.